What safety precautions should be taken for articulated joints?
When using articulated joints, the following safety precautions should be taken into account:
Safety protection: When installing and using articulated joints, appropriate personal protective equipment such as gloves, goggles, etc. should always be worn to avoid possible accidental injuries.
Connection method: Choosing the correct connection method is very important, ensuring that the articulated joint used matches the hard or soft pipe, and avoiding the use of mismatched joints.
Connection tightness: When connecting, the tightness should be moderate. Too loose may cause air leakage, oil leakage, or system failure, while too tight may damage hoses or other connecting components.
Rotation angle: Articulated joints allow for a certain degree of rotation, but should not exceed their allowable range. Exceeding the allowable range may result in connector damage or system failure.

Regular inspection and maintenance: In order to ensure the normal operation and safety of articulated joints, regular inspections and maintenance should be carried out. The inspection includes the tightness, sealing performance, and wear of the joints.
Select appropriate materials and specifications: Choose the appropriate articulated joint materials and specifications based on the application field and working environment. For example, in corrosive environments, materials with good corrosion resistance should be selected.
Follow installation guidelines: When installing articulated joints, follow the installation guidelines and instructions provided by the manufacturer. This helps ensure the correct installation and safety of the joint.
Avoid overload: Avoid subjecting articulated joints to pressure or tension beyond their design range to prevent damage or failure.
Timely problem-solving: If any problems are found with the articulated joint, such as air leakage, oil leakage, or damage, it should be immediately stopped from use and repaired or replaced.
In short, when using articulated joints, safety should always be taken into account, and correct operation and maintenance procedures should be followed to ensure the normal operation and safety of the system.