Manufacturers of hose joints and articulated joints introduce the installation methods of hose joints to you

The composition of water pipe conversion joints includes: elbows, variable diameter elbows, inner and outer wire elbows, tees, variable diameter tees, inner wire joints, variable diameter inner wire joints, outer wire joints, inner and outer wire joints (core repair), caps, plugs, flexible joints, etc.
Introduction to Water Pipe Conversion Joints
Card sleeve type water pipe adapter, with a tight structure and high strength. It can connect unthreaded steel pipes with hoses, eliminating the need for threading process, and only requiring the screw to be screwed in. External thread end connected water pipe adapter, with a tight structure, no air holes, and high strength. Made of zinc alloy material by die-casting, with surface galvanized, sandblasted, or chrome plated. Self fixing water pipe adapters can connect unthreaded steel pipes or unthreaded equipment outlets to hoses, eliminating the need for threading processes.
If PPR pipe is selected, it can be welded with a hot melt machine; If iron pipes are used, they need to be threaded with a threading machine first, and then wrapped with hemp thread or raw material tape.

Installation of water pipe adapter
When installing water pipe adapters, it is important to use suitable materials and first clarify the uses and advantages of various types of water pipe adapters.
Secondly, pay attention to the installation position of the water pipe conversion joint. Water pipes buried in the wall cannot have joints.
When changing the water pipe joint, first close the water valve, and then open it for testing.
Water pipe adapter leakage
What are our solutions if the water pipe adapter leaks? The leakage of water pipe conversion joints is different from that of other parts of the water pipe, and usually cannot be repaired. Only a new water pipe conversion joint can be replaced.
First, remove the original connector. If it is difficult to remove due to rust, a steel saw can be used to make a cut without touching the threads of the water pipe, and then use pipe pliers to unscrew it.
If the rubber pad is aged or absent, it needs to be replaced with a new one. Apply a thick layer of white paint to the thread opening, wrap it with hemp thread (or raw tape), and then reinstall it.
The above is a detailed introduction of the pipe joint manufacturer!